30-Day Money-Back Guarantee
Infrared Heaters Service Guide
Heating Element Replacement For 2010 Models
Heating Element Replacement | 2010 Comfort Furnace & Heat-A-Lot
STEP 1: Start the process by removing the seven screws at the back of the 2010 Comfort Furnace
or Heat-A-Lot Infrared Furnace. This step is to take off the back panel of the unit.
STEP 2: Now remove the four screws on the bottom of the heater.
STEP 3: Turn the unit on its back and the insert should easily slide out.
STEP 4: Next, remove the two screws from the bottom of the
. Pull down on the planel to release it from the rest of the system.
STEP 5: Repeat Step 4 to release the opposite side panel.
STEP 6: Remove the plastic cover on the connection block to reveal the connections module.
STEP 7: Unscrew the element from the connection block.
STEP 8: Now unscrew the cover of the heating element.
STEP 9: On the opposite side, remove the connection block and also the element cover.
STEP 10: Put the element cover back on.
STEP 11: Now on the opposite side, put the element cover back on.
STEP 12: Connect the wire back onto the connection block.
STEP 13: Finally, put the side panels back onto each side of the unit.
< Back to the
Infrared Heaters Service And Repair Guide
Comfort Furnace Replacement Parts
Mirage Infrared Heaters Home
Comfort Furnace Infrared Heater
Heat-A-Lot Infrared Furnace